Miscellaneous

How to Patch an Intex Swimming Pool Air Ring

How to Patch an Intex Swimming Pool Air Ring


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Intex Easy Set pools are known for simple setup and maintenance. Without the capability to hold air, the pool will lose water and eventually collapse. Repairing an Easy Set pool ring is an quick task, requiring only a few minutes and common household tools.

Inflate the top ring on the Easy Set pool using an air pump. This will make it easier to find the area that needs repair.

Mark the damaged area using a marker. Be sure the marker does not have a sharp tip so you don't cause additional damage to the pool ring.

Cut a round patch from the clear vinyl patching material that comes with your Easy Set pool. The patch should cover the hole completely and leave at least 1/4 inch overlap.

Apply patching adhesive around the punctured area on the pool ring as well as to the round patch.

  • Inflate the top ring on the Easy Set pool using an air pump.
  • Apply patching adhesive around the punctured area on the pool ring as well as to the round patch.

Wait ten minutes for the adhesive to cure.

Place the patch over the hole and smooth it to the surface of the ring, rubbing from the middle of the patch to the outside edges. This will remove any air bubbles from under the surface of the patch and create a tight bond.

Fill the ring with air after the patch has dried for at least 12 hours.


Watch the video: Intex pool pump 14 diameter pool (May 2022).